Nickname | quit

Home page

Product Categories

Thermal Protection Ballast Heating Test Chamber

Thermal Protection Ballast Heating Test Chamber

This equipment features a thermal-protection ballast heating test chamber; lighting fixture testing standard (GB/IEC compliant). I) **Scope of Application**: Tests designed to prevent overheating of the control device in heat-protected lamps under all conditions. II) **Compliance Standards**: Meets the requirements specified in Appendix D.1 of GB 19510.1-2004 / IEC 61347-1:2003. III) **Test Procedure**: As per standard specifications, four 300W heating plates measuring 40 x 300 mm are arranged beneath a 560 x 560 x 25 mm insulating panel. The system is then heated, and a temperature controller maintains the internal chamber temperature at 40 ± 5°C, ensuring precise control over the heating duration.

Category:

Electrical accessories component testing

Simulated environment testing equipment

Keywords:

Phone:

Phone:

Email:

Product Description

This equipment features a thermal protection-type ballast heating test chamber; Lamp Testing Standards (GB/IEC Standards)

1) Scope of Application: Testing to prevent overheating of the thermal protection lamp control device under all conditions.

2) Compliance Standard: Meets the requirements of Appendix D.1 of GB19510.1-2004/IEC61347-1:2003.

3) Test Method: Arrange four 40 × 300 mm heating plates, each with a power of 300 W, according to standard requirements beneath a 560 × 560 × 25 mm thermal insulation board. Heat the setup, then use a thermostat to maintain the temperature inside the protection box at 40 ± 5°C, while ensuring precise control over the heating duration.

4) Construction Overview

The test chamber consists of two parts: a control box and a heating chamber.

1) On the stainless steel panel of the control box:

Temperature display, timing, power, heating, testing, and workstation buttons.

The interior of the test chamber consists of a heating plate, high-temperature-resistant asbestos board, a wind shield, shelving units, and thermocouples, as shown in the figure below:

5) Installation Instructions and Precautions

1. Power supply: 220V, Single-phase, 15A

2. Leave about 50 cm of space on both sides behind the machine's placement for maintenance access.

3. Please avoid direct sunlight on the machine's installation location to prevent affecting the test conditions.

Online Consultation

Get prices and free samples now!

Add Product

Category:

Select all

Submit

Electrical accessories component testing

Simulated environment testing equipment

Related Products

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Dongguan Zhongjia Testing Equipment Technology Co., Ltd

0769-83001330

86135 8080 6147(Technical Director)

86135 8090 9432(Mr. Guo, Manager)

chenwg98@126.com

Building 1, Guanghui Zhigu, No. 86, Yinkang Road, Hengli Town, Dongguan City