Product Categories
ZJ-CDQ08
Charging Gun Comprehensive Tester
Keywords:
Charging Gun Comprehensive Test System
Product Description
I. Overview
This test bench is mainly used for the function detection of GB AC gun, GB DC gun, European standard AC gun, European standard DC gun, American standard AC gun, American standard DC gun, and Tesla gun. Each gun can be entered with an independent QR code, and the test results are automatically saved in the report. The qualified test results can be printed. All functions are automatically implemented for one-time testing, which is efficient and labor-saving, and suitable for factory batch full inspection.
II. Detection Function
- Open circuit, continuity, short circuit, and wiring error test for each wire
- Continuity resistance test of the main line
- CP, CC resistance (including button switch pressed and not pressed in two states)
- Electronic lock switch function test
- Insulation test between wires
- Withstand voltage test between wires
- Thermocouple wire test
III. Main Parameters
| Whole machine power input: | Single-phase AC 220V/50HZ |
| Air source input: | 0.6MPa |
| Control system: | PLC+ industrial computer |
| The computer can be connected to the Mes system (the cost is calculated separately) | |
| The scanning gun is entered into the computer, and the device is equipped with a scanning gun code, which can scan the bar code on the product to be tested. Before the test, scan the bar code or QR code on the product. After the test, the scanned bar code can be associated with the test record, and the test data can be traced through the corresponding bar code in the future. | |
| The open circuit, continuity, short circuit, and wiring misalignment tests are scanned and detected by PLC input and output. The PLC automatically determines whether it is qualified after the test is completed. | |
| CP/CC built-in resistance test range: 1~5000Ω, accuracy 1% DC gun CC1/CC2 resistance test: 0~5000Ω, accuracy 1% You can set the upper and lower limits of the resistance to determine whether the resistance is a good product. | |
| Thermistor test range: | 100~50000Ω, accuracy 2%, set the upper and lower limits to determine whether the on-resistance is a good product. |
| Electronic lock test: | Drive voltage: DC12V, which can output forward and reverse voltage to drive the connector or disconnect. It monitors whether the contacts of the switch are conductive to determine whether it is good or bad. |
| Insulation test between wires: | Single-phase test L-N, L-E, E-N, three-phase test L1/L2/L3/E-N, L1/L2/L3/N-E, N/L2/L3/E-L1, L1/N/L3/E-L2, L1/L2/N/E-L3, DC test positive-negative, positive-ground, negative-ground |
| Insulation impedance parameters: | Insulation voltage: DC100～1000V arbitrary setting; Lower limit setting: 1M～1GΩ arbitrary setting; Accuracy: ±5％; Settable alarm insulation resistance value: When the resistance value is less than the set value, it is bad; |
| Withstand voltage test between wires: | Single-phase test L-N, L-E, E-N, three-phase test L1/L2/L3/E-N, L1/L2/L3/N-E, N/L2/L3/E-L1, L1/N/L3/E-L2, L1/L2/N/E-L3, DC test positive-negative, positive-ground, negative-ground |
| Withstand voltage test parameters: | Withstand voltage: AC0～5kV／DC0～6kV arbitrary setting; Leakage current upper limit: AC0．1mA～20mA, DC0．01mA～5mA arbitrary setting Accuracy: ±1．5％＋3 words Display mode: digital display meter indicates the current voltage Voltage regulation mode: automatic program control Alarm detection: When the leakage current value is greater than the set value, it is bad; |
| Test station: | 1 station, test one product at a time. |
| Gun head connection part: | The gun head provides various corresponding gun seat connections, including GB AC gun seat, GB DC gun seat, European standard AC and DC gun seat, American standard AC and DC gun seat, and Tesla gun seat |
| Tail plate connection part: | The product is connected by a quick clamping fixture |
| Socket height: | The basic height of the socket is about 800～1000mm, which is suitable for human operation height |
| Overall dimension: | W1000mmxD800m×H1800mm, with locking mobile casters at the bottom |
| Weight: | About 300kg |
IV. Computer Software
The software supports Win7 and Win10, and all parameter settings can be completed through the software. The test results of each product will be saved to the computer in real time, which is convenient for calling, viewing and exporting analysis. The test system reserves a communication interface, which can be connected to the MES system to upload the test data to the MES database, which is convenient for customers to control.
Data storage: After the test is completed, the test data is stored in real time
Data export: The tested data can be exported, and the export format is EXCEL.
Online Consultation
Get prices and free samples now!
Related Products
Dongguan Zhongjia Testing Equipment Technology Co., Ltd
86135 8080 6147(Technical Director)
86135 8090 9432(Mr. Guo, Manager)
Building 1, Guanghui Zhigu, No. 86, Yinkang Road, Hengli Town, Dongguan City
Add WeChat
Copyright © Dongguan Zhongjia Testing Equipment Technology Co., Ltd All Rights Reserved All rights reserved.
Power by:www.300.cn | SEO | Privacy Policy