Product Categories
ZJ-MZ400
Smart Door Lock Life Tester
Keywords:
Product Description
I. Usage:
The intelligent door lock durability testing device is used to simulate the use behavior test of fingerprint unlocking, key unlocking, password unlocking, and magnetic card unlocking for electronic anti-theft locks and other products. This system provides a variety of test modes for experimental selection. This system fully meets GB 21556-2008 General Technical Conditions for Lock Safety, JG/T 394-2012, IEC 62692 Digital Door Lock System Standard, UL294 Access Control System, UL1037, BHMA A156.25, BHMA A156.13, BHMA A156.36 and other related standard test requirements. An integrated life test system specially designed for password electronic door locks, fingerprint electronic door locks, and smart card door locks.
II. Main Compliant Standards:
1) Section 5.11 "Durability" requirements in GA374-2001《Electronic Anti-theft Lock》standard;
2) Section 7.5.1.3 "Battery Capacity and Undervoltage Indication Test" requirements in GA701-2007《General Technical Requirements for Fingerprint Anti-theft Locks》standard;
3) Section 6.14 "Repeated Opening and Closing Times" test requirements in JG/T394-2012《General Technical Requirements for Intelligent Building Door Locks》standard.
III. Intelligent Data Acquisition System (1 set):
1. Acquisition system meets the standards:
1) Meets the requirements of Section 5.6 "Key Quantity Requirements" and Section 5.4 "False Recognition Rate" in GA374-2001《Electronic Anti-theft Lock》standard;
2) Meets the requirements of Section 6.3.9 "Communication Function" and Section 6.4 "Performance" in GA701-2007《General Technical Requirements for Fingerprint Anti-theft Locks》standard;
2. Description of main technical parameters of the acquisition system:
1) 2 analog input channels, 16-bit resolution;
2) 2 channels of analog output, 16-bit resolution;
3) 1MSps input sampling rate;
4) Basic accuracy 0.01%;
5) 2MSps output sampling rate;
6) Range ±5V;
7) Common mode rejection ratio 90dB;
8) Input impedance 1GΩ||10pF;
9) 12VDC power supply;
10) Rich Labview host computer development routines;
11) Can be inserted into N8000 measurement and control host for use, or can be used independently;
12) NXI slot number 1.
IV. Technical Features:
1. The equipment has a simple operation panel, the test operation is clear at a glance, the parameter setting and adjustment are easy to control, and the use is more convenient;
2. It adopts Taiwan stepping motor drive, high-precision positioning is accurate, low noise, can be used for a long time, and the test frequency is continuously adjustable;
3. It adopts a special power supply rectifier circuit to improve the long-term use ability and anti-interference of the motor and executive components;
4. It adopts program-controlled origin reset, without having to manually align the fixture to the original position.
5. On the equipment control software, the touch screen display is used for input control, PLC is used for programming, the working condition display is clear, and the corresponding parameters of each working condition can be set and adjusted, such as test speed, test time, delay time, etc.
6. The main components of the equipment, such as cylinders, drive motors, touch screens, PLCs, frequency converters, force sensors, data acquisition cards and other key components should be international famous brands to improve the grade and reliability of the equipment and meet the requirements of relevant tests.
requirements.
Online Consultation
Get prices and free samples now!
Related Products
Dongguan Zhongjia Testing Equipment Technology Co., Ltd
86135 8080 6147(Technical Director)
86135 8090 9432(Mr. Guo, Manager)
Building 1, Guanghui Zhigu, No. 86, Yinkang Road, Hengli Town, Dongguan City
Add WeChat
Copyright © Dongguan Zhongjia Testing Equipment Technology Co., Ltd All Rights Reserved All rights reserved.
Power by:www.300.cn | SEO | Privacy Policy