Product Categories

Mechanical Strength Testing Device for Plugs and Connectors

ZJ-QD01

Mechanical Strength Testing Device for Plugs and Connectors

1. The plug and connector mechanical strength testing device is suitable for checking the mechanical strength of the lightest flexible cable with the minimum cross-sectional area corresponding to the rated value specified in Table 13 on detachable electrical appliance accessories. Fix the free end of the cable, which is about 2.25m long, to the wall at a height of 75cm from the ground. Grab the sample so that the cable is horizontal, and then drop the sample onto the concrete floor 8 times. After each drop, rotate the cable at the fixed point by 45°. After the test, the sample should not show damage in the standard sense, especially the parts should not be separated or fall off.

Category:

Charging gun detection equipment

Keywords:

Phone:

Phone:

Email:

Product Description

I. Overview
　　1. The plug and connector mechanical strength testing device is suitable for checking the mechanical strength of the lightest flexible cables with the smallest cross-sectional area corresponding to the rated values specified in Table 13 on detachable electrical accessories. Fix the free end of the cable, which is about 2.25m long, to the wall at a height of 75cm from the ground. Grab the sample to keep the cable horizontal, and then drop the sample onto the concrete floor 8 times. After each drop, rotate the cable at the fixed point by 45°. After the test, the sample should not show damage in the standard sense, especially the parts should not be separated or fall off.
　　2. The device fully meets the mechanical strength requirements of Chapter 6.15 and 7.15 of GB/T20234.1-2015 'Conductive connection device for electric vehicle charging Part 1: General requirements';
　　The charging interface is tested according to the method specified in GB/T11918.1-2014 'Industrial plugs, sockets and couplers Part 1: General requirements' Chapter 24, Figure 8 for mechanical strength.
　　Meets standard IEC 62196-1:2014
　　Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements Section 26.3 Rewirable Plugs and vehicle connectors.

Main technical parameters

1. Equipped with a manual angle dial, which can be rotated to the specified angle according to the standard requirements during the test.
2. There is a sample installation release support frame.
3. A spirit level is installed on the mounting bracket, and adjustable horizontal swivel feet are installed at the bottom.
4. The bracket is equipped with a height scale to facilitate the calibration of the release drop height.
5. Drop method: manual release.

None

Online Consultation

Get prices and free samples now!

Add Product

Category:

Select all

Submit

Mechanical Strength Testing Device for Plugs and Connectors

Charging gun detection equipment

Related Products

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Dongguan Zhongjia Testing Equipment Technology Co., Ltd

0769-83001330

86135 8080 6147(Technical Director)

86135 8090 9432(Mr. Guo, Manager)

chenwg98@126.com

Building 1, Guanghui Zhigu, No. 86, Yinkang Road, Hengli Town, Dongguan City