Product Categories
ZJ-WQ01
Charging interface cable bending testing machine
Keywords:
Product Description
I. Overview
This equipment shall meet the test requirements of GB/T20234.1-2023 Section 6.2.10.4, GB/T11918.1-2014 Section 24.4, and IEC 62196-1:2022 Section 26.4, and is suitable for bending tests on non-removable wire electrical accessories such as charging guns.
This equipment is controlled by PLC and touch screen, which is convenient to control. The angle, speed, and number of times can be set. Fix the sample on the fixture and apply a certain load. The fixture shakes left and right during the test. After a certain number of times, check the disconnection rate or check the total number of swings when it cannot be energized. This machine can automatically count, and the instrument automatically stops working when the test material is bent to the point where it cannot be energized. This equipment can also be tested with load, with reserved load wiring ports.
II. Usage Environment
| 1 | Ambient temperature | 5～35℃ |
| 2 | Ambient humidity | 85%R.H 25℃ |
| 3 | Atmospheric pressure | 86～106Kpa |
| 4 | Environmental conditions | There shall be no strong vibration, strong electromagnetic field interference, high concentration of dust and corrosive substances, direct sunlight or other direct radiation from heat sources around the equipment site. |
| The equipment should be placed horizontally in a well-ventilated laboratory, with sufficient space around it for operation and maintenance. |
Main technical parameters
| Serial number | Technical parameters |
| 1 | Control system: Imported 7-inch human-machine interface (true color LCD touch screen), Panasonic programmable controller (PLC) |
| 2 | Screen setting and display data: parameter monitoring, angle setting, speed presetting, count setting, alarm indication and character prompts, etc. |
| 3 | Test station: single station |
| 4 | The program can set up experiments for a single station or any station. |
| 5 | Test speed: adjustable and intelligent adjustment (0～80 times/minute (one round trip counts as one time) |
| 6 | Test bending rotation angle: adjustable and intelligent adjustment (left and right angle 0~180 degrees test angle can be preset) |
| 7 | Total angle * speed less than 5400 |
| 8 | Counter: 0～9999999 times can be preset, with power-off memory function |
| 9 | Weight: The configured weights can be combined into 20N, 25N, 50N, 75N, 100N, 120N/140N/180N. |
| 10 | Material A3, surface electroplating |
| 11 | Reserved load access port current ≥800A |
| 12 | External pointer display bending angle 0~360 degrees |
| 13 | With detection of disconnection function |
| 14 | Power train: servo motor + turbine reduction box drive |
| 15 | Test cable range: diameter 5~70mm |
| 16 | 1 set of fixed bracket with live wire, convenient for wire clamping and installation |
| 17 | Overall dimensions: approximately W950＊D650＊H1600mm |
| 18 | Weight: about 220Kg |
| 19 | Power supply voltage: AC220V±5%, 50Hz10A |
| 20 | Equipment meets the requirements of Figure 9  |
Online Consultation
Get prices and free samples now!
Dongguan Zhongjia Testing Equipment Technology Co., Ltd
86135 8080 6147(Technical Director)
86135 8090 9432(Mr. Guo, Manager)
Building 1, Guanghui Zhigu, No. 86, Yinkang Road, Hengli Town, Dongguan City
Add WeChat
Copyright © Dongguan Zhongjia Testing Equipment Technology Co., Ltd All Rights Reserved All rights reserved.
Power by:www.300.cn | SEO | Privacy Policy