Product Categories
ZJ-NY11000N
Vehicle crushing testing machine
Category:
Keywords:
Product Description
Product Overview
Suitable for pressure life tests of various electric vehicle charging piles. The power plug and vehicle plug with the manufacturer's recommended cable are randomly placed on the cement floor, and a car tire with the same load as P225/75R15 is used to apply a pressure of (11000±500) N at a speed of (8±2) km/h over the power plug or vehicle plug (tire inflation pressure 220±10kPa) to simulate the ability of the power plug or vehicle plug to withstand vehicle rolling. Complies with the test requirements of section 7.13 in standard GB/T20234.1-2015.
Technical Parameters
1. Control method: PLC control, touch screen man-machine interface intelligent operation;
2. Test station: 1 station;
3. Process structure: The frame is made of steel structure with surface electrostatic spraying, the base plate simulates a cement floor, the rolling mechanism can simulate the free up and down sliding of the car after rolling the object, the plug bears the same pressure, and is equipped with limit protection, and another set of drive devices drives the rolling mechanism to realize the front and rear rolling action. The main components are made of stainless steel and aluminum parts;
4. Bearing load: 11000±500N;
5. Rolling speed: 8±2km/h;
6. Bearing base plate: Base plate with cement surface, configurable with fixing fixture;
7. Lifting device: Imported guide components allow the load to move freely up and down;
8. Sample installation: Electric forklift loading and unloading;
9. Rolling drive: Servo motor with worm gear reducer;
10. Timing and counting: Can be set within the touch screen standard requirements;
11. Rolling main parts: Michelin tires (P225/75R15);
12. Shock absorption method: Shock absorption airbag shock absorption;
13. Input power: AC380V 50HZ.
Online Consultation
Get prices and free samples now!



